3" Lift Kit with OK 2.5" Shocks by Zone Offroad
Take your new HD to the next level with the 3" Adventure Series Lift Kit from Zone Offroad. Engineered for easy bolt on fitment and improved travel, these 3" Adventure Series Lift Kits bridge that gap between an entry level leveling kit and full IFS lift system offering next level performance without the cost and extensive installation. The heart of this new system is a pair of heavy duty replacement upper control arms (UCAs) designed to improve range of motion for more suspension travel when wheeling in rough terrain. These new control arms dwarf the factory units and are built from high strength steel, boxed and fully welded with CNC-machined bushing and ball joint cups repositioned to operate in the neutral position at 3? of lift. They use OE durometer rubber bushings and greaseable OE-style heavy duty ball joints for quiet, reliable operation and superior corrosion resistance to uniball style control arms. Along with the arms, a pair of reindexed cast steel torsion bar keys are supplied up front to lift vehicle. Zone Offroad includes a small differential relocation kit (4WD models only) to correct CV axle operating angles without effecting ground clearance. The sway bar operating angle is corrected with the use of a pair of relocation brackets allowing for full droop of the suspension and proper clearance. In the rear a 2? block and u-bolt kit is used to create a level to slightly tail high stance. Rounding out the kit are a set of Nitro gas or FOX adventure series IFP gas shocks at all 4 corners for a smooth ride and impressive performance across any terrain. Take your late model GM 2500HD to the next level with Zone Offroad!
ZONE OFFROAD - BUILT FOR ADVENTURE
Lift Kits Engineered for Performance
Zone Offroad lift kits are designed to give your truck or SUV the clearance and capability to take on any trail, without sacrificing ride quality or durability.
Utilising a lot of the BDS Suspension components, the Zone Offroad Lift Kits do not compromise in strength. In fact, we think they're over-engineered, and that's why we love them!
Built to Handle the Harshest Conditions
From rocky trails to muddy backroads, Zone Offroad components are built tough with high-strength materials and tested to endure whatever the off-road world throws at you.
Complete Kits, Seamless Fitment
Every Zone Offroad kit is designed for straightforward installation and precise fitment, ensuring your vehicle performs at its best both on and off the road.
At America's Garage, we paid the lift kits with the premium Outback Kitters shocks to give you the perfect balance of ride comfort and price.
Adventure-Ready, Every Time
Frequently Asked Questions
Generally, no. Under Australian Consumer Law, your warranty can only be affected if the manufacturer can prove the lift kit caused the issue. Otherwise, your warranty remains valid.
Compliance requirements depend on the lift height and the vehicle model. Some kits can be engineered for road legality, while others may require a GVM upgrade or additional certification. Check your state regulations and refer to our GVM Upgrade page for compliant options.
Wheel and tyre requirements vary depending on the specific lift kit. Please refer to the fitment table above for exact wheel and tyre specifications for your vehicle.
We can put you in touch with a reputable installer through our network. Contact us, or check our Dealer Network to find an approved installer near you.
Zone Offroad products include a limited lifetime warranty on most components, covering manufacturing defects. Wear items such as bushings, shocks, and joints may have separate warranty terms. Contact us for item-specific warranty details.
America’s Garage customises all Zone Offroad kits to suit Australian roads, regulations, and driving conditions. This often involves removing spacers and replacing them with coils and shocks to ensure legal compliance and better performance in Australia.
It depends on the vehicle and the engineered configuration. Some 4–6" lifts can be made compliant when paired with the correct GVM upgrade. Refer to our GVM Upgrade page for a list of lift kits that can be certified pre- and post-registration.
Yes. All Zone Offroad lift kits are FMVSS compliant and pass required ESC (Electronic Stability Control) test standards.
No. Strut and coil spacers are not legal under Australian regulations, which is why our kits replace U.S. spacer components with compliant suspension parts.
Some lift heights require engineering certification depending on your state’s regulations and the level of modification. We can advise on this at the time of purchase.
While technically possible, we recommend using a qualified installer to ensure proper fitment, safety, and compliance with Australian road laws.
Lift kits alone generally do not increase towing or payload. If you require additional capacity, ask us about our GVM upgrade options that can be engineered with certain Zone Offroad kits.
Yes, all suspension modifications affect handling. Our Australian-spec kits are designed to maintain safe, controlled handling while improving off-road performance.
Zone Offroad kits are designed to maintain proper function of factory electronic safety systems. Installation by a qualified fitter ensures correct sensor and geometry alignment.
Absolutely. Our Australian-adapted Zone Offroad kits are engineered for a balance of on-road comfort and off-road capability, making them ideal for daily driving and touring.
